The difference between automatic vacuum impregnation machine and manual vacuum impregnation machine
Dongguan Juke Industrial specializes in the production of vacuum impregnation machines, vacuum pressure impregnation process for transformers. There are automatic vacuum impregnation machines and manual vacuum impregnation machines. Today, Xiaobian tells you about the difference between automatic vacuum impregnation machines and manual vacuum impregnation machines.
The automatic vacuum impregnation machine is controlled by PLC. The controller can store 0-500 products. The cylinder size can be customized according to customer requirements.
Automatic vacuum impregnation machine features:
1. Adopting stepper motor drive precision ball screw with moving slot lifting type impregnation, preset lifting height; preset lifting height (maximum stroke of sub-slot 60mm; displacement accuracy ±0.05mm)
2. The screw jack has high bearing capacity and high control precision. The PIN will not stick to the varnish, and there is no need for secondary tin plating.
3. All Chinese PLC control, intelligent vacuum pumping, to achieve no bubble 凡立水, impregnation effect beautiful. Automatic double cylinder vacuum impregnation machine
4. Automatic switch box cover, secondary automatic vacuuming, saving time and effort, environmental protection, energy saving, single-person multi-machine operation.
5. The groove is made entirely of 10MM steel plate. Double glass observation window for viewing immersion at any time
Automatic vacuum impregnation machine operation mode:
(1) First input the parameters of the impregnation product into the controller (vacuum time, exhaust time, soaking time, defoaming time).
(2) Set the parameters, just one (start) button to complete a series of product impregnation.
(3) Automatic alarm, automatic opening, manual removal and completion of the product.
Manual vacuum impregnation machine features:
1. Support the top cover with 50KG hydraulic rod.
2. The top cover is sealed with silicone rubber and the cover is quickly clamped.
3, the body has: manual function.
Manual vacuum impregnation machine operation mode:
Open the impregnation cover and place the neat product impregnation tray on the cylinder bracket. Close the impregnation cover and lock the quick clamp.
2. Twist the start switch and the vacuum pump starts. When the pressure gauge is displayed to 30-40mmhg, open the ball valve switch under the cylinder to pump the varnish into the cylinder.
3. Twist the spotlight switch and observe through the cover glass. When the varnish reaches the required amount, close the ball valve under the cylinder.
4. When the barometer pointer reaches 700mmhg or more, press the start switch to stop. The alarm is given when the vacuum impregnation time reaches the set time. Open the ball valve switch and discharge the gas when the gauge pointer returns to 0mmhg. Open the ball valve switch under the cylinder and turn off the ball valve switch after the cylinder has been drained.
5. Turn on the start switch and start the vacuum pump. When the gauge pointer reaches 700 mmhg or more, press the stop switch twice in succession. When the vacuum is reached, the alarm is given when the set time is reached, and the ball valve switch is opened to discharge the gas.
6. After the vacuum is completed, open the cylinder head, take out the product, and finish the operation.
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.