Automatic rubberizing machine running operation steps

2018-12-28 14:09:25 HUIYUECN 0
Automatic rubberizing machine running operation steps

Automatic rubberizing machine running operation steps

The automatic rubber laminating machine must be operated according to the correct operation steps to avoid abnormal situations. The following Huiyue Xiaobian will list the correct operation steps, Single Spindle Winding Machine and hope to help everyone.

1. Power on
2. The machine automatically finds the origin and prompts the origin state.
3. Confirm the mechanical operation mode
4. Enter the number of laps
5. Insert BOBBIN (spool) into the fixture by manual loading.
6. Attach the tape guide and tighten the tape to the BOBBIN.
7. After confirming the fixed safety, press the foot pedal and execute the automatic tape wrapping program.

8. The automatic rubber laminating machine removes the finished product, please manually return the material and load the material, which is full of the seventh step.


Follow Us

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.

New Products

Contact Details

  • No. 53, Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City, Guangdong Province, China
  • +86-769-89870552
  • MR.GUAN@HUIYUECN.COM