Detailed operating functions of the vacuum impregnation machine
The vacuum impregnation machine is an automatic vacuuming machine that saves time and effort, is environmentally friendly, vacuum impregnation machine and energy-saving. It can realize automatic operation of single-person multi-machine operation. The following are the detailed operation functions of the vacuum impregnation machine.
1. Put the object to be impregnated into the cylinder, close the cylinder head and lock it by the cylinder head locking device.
2. Vacuuming the negative pressure and maintaining the pressure for the simmering time; pressurizing the liquid in the liquid storage tank into the cylinder under the action of the atmosphere, and closing the liquid inlet pipe after the liquid reaches the determined height.
3. (Continue) vacuum: maintain pressure after the set negative pressure is maintained.
4, balance (inhale), open the suction (call) nozzle, the air naturally enters the cylinder under the action of atmospheric pressure, so that the pressure inside the cylinder is equal to the pressure outside the cylinder.
5. When positive pressure is needed, positive pressure can be added. When positive pressure is not required, the liquid is immersed in the raw material by vacuuming. (Mainly let the liquid in the cylinder enter the object. Balance or soak the object in the cylinder)
6. Exhaust (exhale and empty), open (suck) the exhalation nozzle to make the air in the cylinder exhale. The pressure is equal to the outside of the cylinder.
7. Pressurize and drain the liquid, and press all the liquid in the cylinder by adding positive pressure. At this time, the liquid discharge port is closed (the pressure is maintained in the cylinder)
8. Exhaust again to balance the pressure inside the cylinder with the outside of the cylinder.
9. Dry, and the dry bucket in the cylinder rotates. The liquid in the impregnated object is dried by centrifugation to remove excess liquid from the impregnated object.
10. Drain the liquid in the vacuum impregnation machine and take out the object.
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.