How to set the CNC winding machine cable rod?

2018-12-22 10:07:13 HUIYUECN 0

How to set the CNC winding machine cable rod?

How to set the CNC winding machine cable rod?

Our Huiyue Technology CNC Winding Machine adopts the latest synchronous and easy-to-use cable, which has extremely high precision and super intelligent mode. There CNC Winding Machine must also be a standard setting on the cable rod. How to set the CNC winding machine cable rod?

    When the CNC winding machine sets the winding point, width and cable rod limit, in addition to the number key, you can also use the [jump] or [retract] to set the teaching position. When setting the winding point and the limit value of the cable rod, the current position of the cable bar is the set number, and when the width is set, the controller will calculate the current position and the winding point. , the width is obtained, and the direction of the cable is automatically determined.


Follow Us

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.

New Products

Contact Details

  • No. 53, Shangnan Road, Shangjiao Community, Chang'an Town, Dongguan City, Guangdong Province, China
  • +86-769-89870552
  • MR.GUAN@HUIYUECN.COM