Huiyue CNC winding machine button operation instructions

2018-12-22 09:49:22 HUIYUECN 1

Before operating the CNC winding machine, you must first understand the button description on the CNC controller. This CNC Winding Machine will make the CNC winding machine smoother. What are the CNC winding opportunities? What are the functions of these buttons? The following is a detailed explanation of the key operation instructions of the Huiyue CNC winding machine.

[0]-[9]: A total of ten keys for inputting values.
[Step setting]: Used to enter the data setting status.
[Yield setting]: Used to set the target output.
[Start Step]: Used to specify the starting step of the memory.
[End Step]: Used to specify the end step of the memory.
[Data Selection]: When editing, select the data item.
Pause or running, used to display the total number of turns or the current position of the pole.
[Line Direction]: Used to specify the direction of the step line when editing.
[Parking at both ends]: When editing, it is used to specify whether the step has to stop at both ends.
[Wound Direction]: Used to specify the direction of the winding of the step when editing.
[Auto homing]: When editing, it is used to specify whether the wrap point should be automatically positioned when the step is executed.
[Auto Start]: When editing, it is used to specify whether to start automatically when executing to this step.
[-]: When editing, you can jump back to the editing of the step or data item.
[Clear]: When editing, clear the number in the current edit to zero.
[COPY]: During editing, the data of the step-up sequence is copied to the data item of the current step.
[Input]: When editing, the data item in the edit is written to the memory.
[Speed]: The speed and output display switch.
[Return to zero]: The production counter is cleared to zero.
[Auto]: Automatic cycle selection button.
[Brake]: When parking, the bobbin brakes or relaxes.
[Jump]: Forces a jump to the next step when the winding is paused.
[Retirement]: When the winding is paused, it is forcibly jumped back to the upper step.
[Return]: In any state, the current operation is terminated, reset, and returned to the standby state.
[Parking]: When winding, the winding will be suspended.
[Start]: Start winding in the stop.

HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.