HY-Z02 automatic impregnation machine is equipped with exhaust filter for recycling, with environmental protection and recycling double effect. Then how to operate the transformer winding after using the impregnation machine to dip paintvacuum impregnation machine?
1. Lift the winding from the paint can to paint, and the paint time is not less than 30min. If there is a lacquer on the winding after the lacquer is applied, use a scraper to gently scrape it off to ensure a smooth and smooth film. Pay attention to dust during the paint dripping process.
2. When the winding enters the oven, the oven temperature must be 165±5°C and dry for 3~4 hours.
3. When the winding is discharged, the paint film is completely dried to pass the test. Otherwise, extend the drying time until drying.
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.