Vacuum impregnation machine manufacturers explain the definition of drying insulation paint
Mostof the raw materials for vacuum impregnation immersion paint areimpregnated with insulating varnish. The operation mode of our companyis: vacuum impregnation machine PLC control, can store 500 kinds of products, the operation is verysimple, as long as the impregnation The product parameters (vacuum, impregnation time, defoaming, exhaust, etc.) are set, press the start button to run. When the no-product product setting is named, it will be saved onthe PLC controller. You can operate the finished batch product withoutsetting it up. After using this product, you can call this data to run.After the completion, the pneumatic automatic opening will be completed.
Thedrying type insulating varnish refers to an insulating varnish thatneeds to be baked by heating to a predetermined temperature to react andcure. Mostof the insulating varnishes are dry-type insulating varnishes, such asamino alkyd varnish, epoxy lacquer, polyester lacquer and organic enamellacquer. These types of lacquers are chemically crosslinked and baked by heating, so they have good performance and a variety of uses.
Dryingtype insulating varnish can be divided into conventional dryinglacquer, quick drying baking lacquer, low temperature drying lacquer andlow temperature quick drying baking varnish according to the bakingtemperature and the speed of curing. The speed of curing is a relative concept. There is no clear standard, and the temperature also affects the speed of curing. Theimpregnating varnish with a drying time of less than 1 hour in theproduct index is called a quick-drying lacquer, and the product can bedried at 100 ° C to become a low-temperature baking varnish.
HUIYUECNautomation main product series: transformer magnetic core automaticwinding machine, automatic tape machine, automatic vacuum impregnationmachine, automatic flip soldering machine, and so on,Products are widely used in high and low frequency transformers, inductors, ballasts and motor manufacturers.Transformer manufacturers prefer a one-stop solution.